Chip conveyor

Drag link conveyor KBF

The POLO KBF drag link conveyor makes the difference. It has been designed in such a way that no chip nests can settle in the transport system. This minimises the cleaning work and increases not only productivity but also safety. The KBF can be integrated on machine tools as a stand-alone conveyor or as a pre-cleaning stage of an interlinked filter process.

Their advantages

Robust chain
For short and medium length chips
For broken chips and grinding sludge

Link to technical consultation

Short info

Flat side walls prevent the formation of chip nests
Minimum liquid discharge at the discharge point
Extremely robust, wear-free chain

Link to data sheet

Clears completely

Reliably discharges chips continuously. The specifically selected chain ensures reliable production.

Design

Scraper angles are located in the sturdy welded construction, which automatically convey the chips out of the conveyor by means of the discharge slope. An overflow box with a pump has been integrated.

Function

Scraper angles glide over the container floor and capture the chips over the entire width of the trough. The sedimented chips are removed completely. Due to the flat side walls, the formation of chip nests is impossible. Slits in the scraper angles
ensure that liquid discharge at the discharge is minimal. The brackets are connected by two robust endless chains with a low-friction deflection unit.
A three-phase geared motor is used for the drive. The tensioning station of the conveyor chain is located on the discharge head and is thus easily accessible when installed. Robust pocket wheels ensure low-wear transport of the conveyor chain.
The overflow box houses the pump which is protected against dry running by a float switch.